Flip Scale Shift ! You can attenuate or invert a signal with just one knob ! If the Flip Scale knob is turned fully clockwise you have your complete signal, if fully counterclockwise you have your signal fully inverted and off course everything in between.

With the Shift knob you can shift the DC value of your signal up and down at a maximum of +12V and -12V and everything in between. Very Handy with LFOs that doesn’t support that function natively.

Input 2 is normalled with input 1, so with no cable inserted in input 2 you have the signal of input 1 on output 2. 

If no cables inserted on any input, or if you have a fully cut-off enter signal, you have a total of 2 separate DC sources with the help of the shift knob on output 1 and 2. Maximum DC output voltage is +8V and -8V.